Arduino IoT bundle op basis van MKR1000

Referentie
GKX00006
Swipen voor 2 additionele foto's
€ 95,00 € 78,51
1 tot 2 werkdagen
Details
Deze kit is de ideale manier om te starten met Internet of Things. Het bevat alle componenten nodig om 5 IoT projecten te maken.
Meer informatie
Meer informatie
Referentie GKX00006
Extra

Merk ARDUINO
Technische specificaties

The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments.

 The 5 experiments you can make:

 

Taking your first steps into the world of connected objects has never been easier - see how with the Arduino IoT Bundle and Arduino IoT Cloud

The kit is based around the MKR1000—a powerful board that combines the functionality of the Zero and the Wi-Fi Shield—and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

  • 1 Arduino MKR1000 board, with header soldered.
  • 1 micro USB cable, 
  • 1 400-point breadboard, 
  • 70 solid-core jumper wires, 
  • 1 9V battery snap, 
  • 1 stranded jumper wire 
  • 1 stranded jumper wire,
  • 6 phototransistors, 
  • 3 potentiometers (10 kilohm), 
  • 10 pushbuttons, 
  • 1 temperature sensor (TMP36), 
  • 1 tilt sensor, 
  • 1 alphanumeric LCD (16 x 2 characters), 
  • 1 bright white, 
  • 34 LEDs (6 ldr bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue), 
  • 1 small DC motor (6/9V), 
  • 1 small servo motor, 
  • 1 piezo capsule (PKM17EPP-4001-B0), 
  • 1 H-bridge motor driver (L293D), 
  • 1 octocouplers (4NE5), 
  • 2 MOSFET transistors (IRF520), 
  • 5 capacitors (100uF),
  • 5 diodes (1N4007), 
  • 3 transparent gels (R,G,B)
  • 1 male pin strip (40 x 1), 
  • 20 resistors (220 ohm), 
  • 5 resistors (560 ohm), 
  • 5 resistors (1 kilohm), 
  • 5 resistors (4.7 kilohm), 
  • 20 resistors (10 kilohm), 
  • 5 resistors (1 megohm), 
  • 5 resistors (10 megohm)

Please note, don't connect 9V to the board, as it will be damaged.
You can use the 9v Battery strip to supply an external component.

* Ondanks een zeer uitgebreid voorraadsysteem, is het mogelijk dat de voorraadstatus niet overeenstemt met de actuele voorraad. Aarzel niet ons te contacteren, indien u zekerheid wenst over de beschikbaarheid. 

** De weergegeven foto bij de producten kan verschillen van het eigenlijke product.